Stor5; Stor6 - Dell PowerEdge VRTX Reference Manual

Severity Severity 1 (Critical)
Trap/EventID 4177
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

STOR5

Message Redundancy lost.
Arguments
Detailed A virtual disk or enclosure has lost data redundancy. In the case of a virtual disk, one or more
Description physical disks included in the virtual disk have failed. Due to the failed physical disk or disks,
the virtual disk is no longer maintaining redundant (mirrored or parity) data. The failure of an
additional physical disk will result in lost data. In the case of an enclosure, more than one
enclosure component has failed. For example, the enclosure may have suffered the loss of all
fans or all power supplies.
Recommended Identify and replace the failed components. To identify the failed component, select the
Response Action Storage object and click the Health subtab. The controller status displayed on the Health
subtab indicates whether a controller has a failed or degraded component. Click the controller
that displays a Warning or Failed status. This action displays the controller Health subtab
which displays the status of the individual controller components. Continue clicking the
components with a Warning or Failed status until you identify the failed component. See
Storage Health for more information. See the enclosure documentation for information on
replacing enclosure components and for other diagnostic information.
Category Storage
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID 4178
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

STOR6

Message CEM Storage Management detected inventory change(s) after host re-boot.
Email LC Log
Alert
TRUE TRUE
arg1
arg1 = VD/Enclosure Name
•
Email LC Log
Alert
TRUE TRUE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
Reset
FALSE
Reset
FALSE
715