Swc8510 - Dell PowerEdge VRTX Reference Manual

Arguments
Detailed Unable to communicated with iDRAC.
Description
Recommended Check if iDRAC is ready and system is running properly. Utilize the RACADM command by
Response Action running "racadm getversion" to list all the servers and make sure the iDRAC version is
displayed. If the iDRAC is listed as Not Ready then wait until it becomes ready. A Virtual Reseat
may be required. The Lifecycle log in the server identified in the message may have additional
information about the inability of the iDRAC to apply Profile settings.
Category Audit
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWC8510

Message Unable to apply
Arguments
Detailed Unable to communicate with the iDRAC of the requested Server.
Description
Recommended Check if iDRAC is ready and system is running properly. Utilize the RACADM command by
Response Action running "racadm getversion" to list all the servers and make sure the iDRAC version is
displayed. If the iDRAC is listed as Not Ready then wait until it becomes ready. A Virtual Reseat
may be required. The Lifecycle log in the server may have additional information about the
inability of the iDRAC to apply Profile settings.
Category Audit
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
762
arg1 = profile name
•
arg2 = slot number
•
Email LC Log
Alert
FALSE TRUE
arg1 Profile to requested Server(s)
arg1 = profile name
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE