Swc8526; Swc8527 - Dell PowerEdge VRTX Reference Manual

SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWC8526

Message Unable to delete Chassis Group member
Arguments
Detailed Unable to delete Chassis Group member identified in the message. Another user may have
Description deleted the member before the operation or the group may have been disbanded.
Recommended Make sure the member identified in the message exists as a member of the Chassis Group. Use
Response Action the CMC web interface to select the lead chassis, select the setup tab, and then select the
group administration sub tab and check if the member exists. If the member exists, restart the
group leader and retry the operation.
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWC8527

Message Chassis Management Controller is unable to update the iDRAC user name to "root".
Detailed Chassis Management Controller unable to update the IDRAC root user username as root. This
Description can happen if the communction to the iDRAC from CMC is non-functional or if the username
supplied is not valid.
Email LC Log
Alert
FALSE TRUE
arg1 = member id
•
arg2 = DNS or IP address of member
•
Email LC Log
Alert
FALSE TRUE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
arg1 ( arg2 )
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE
Reset
FALSE
771