Stor031; Stor032 - Dell PowerEdge VRTX Reference Manual

Category Configuration
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

STOR031

Message Lifecycle Controller is not enabled.
Detailed For 11G systems: System Services must be enabled to perform the requested operation.
Description System Services has been disabled through the iDRAC configuration utility accessed by
pressing CTRL+E on boot up or through a remote operation. For 12G systems: Lifecycle
Controller must be enabled to perform the requested operation. Lifecycle Controller has been
disabled by pressing F2 Setup, selecting iDRAC Configuration, and selecting Lifecycle
Controller Settings on boot up or through a remote operation.
Recommended For 11G systems: Use the iDRAC configuration utility to enable the System Services by pressing
Response Action on the CTRL+E option on boot up at the targeted system. For 12G systems: Use F2 Setup, select
iDRAC Configuration, and select Lifecycle Controller Settings, to enable the Lifecycle Controller
on boot up of the targeted system.
Category Configuration
SubCategory STOR = Storage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

STOR032

Message Lifecycle Controller is currently in use.
Detailed Lifecycle Controller is unable to gain access to internal storage due to use by another
Description application or operation.
730
Email LC Log LCD
Alert
FALSE FALSE FALSE
Email LC Log LCD
Alert
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE