Filter
IPMI Alert SNMP
Visibility
Alert
TRUE
FALSE
TRUE
HWC2015
Message
The
Arguments
Detailed
None.
Description
Recommended
No response action is required.
Response Action
Category
System Health
SubCategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
TRUE
FALSE
TRUE
HWC5035
Message
An over-temperature event detected on I/O module
Arguments
Detailed
The I/O module over heated.
Description
Recommended
Do the following: 1) Make sure fans are installed and working correctly. 2) Check the
Response Action
temperature sensor status for the chassis and make sure it is within the chassis operating
temperature range. 3) Reseat the I/O module to clear the over-temperature condition. If the
problem persists, contact the service provider.
Category
System Health
SubCategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
2329
288
Email
LC Log
Alert
TRUE
TRUE
arg1 is configured correctly.
arg1 = name
•
Email
LC Log
Alert
TRUE
TRUE
arg1 = number
•
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
arg1 .
Reset
FALSE
Reset
FALSE