Swu8548; Swu8549 - Dell PowerEdge VRTX Reference Manual

LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWU8548

Message Unable to update the Standby CMC firmware. The Image was not accessible.
Detailed The firmware update operation of Standby CMC was not successful. The firmware image could
Description not be accessed.
Recommended Make sure that the CMC firmware image file is available at the location specified in the
Response Action operation, and then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

SWU8549

Message Unable to update the firmware of Standby CMC and Active CMC. The checksum process was
not successful.
Detailed The firmware update process of Active CMC and Standby CMC was not successful, because of
Description a firmware image checksum error.
Recommended Reacquire the Image file from the source location, and then retry the operation.
Response Action
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
810
Email LC Log LCD
Alert
FALSE TRUE FALSE
Email LC Log LCD
Alert
FALSE TRUE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE