Bat1033; Bat1001 - Dell PowerEdge VRTX Reference Manual

Recommended No response action is required.
Response Action
Category Storage
SubCategory BAT = Battery Event
Severity Severity 3 (Informational)
Trap/EventID 4275
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

BAT1033

Message The battery on
Arguments
Detailed The controller cannot communicate with the battery. Either the battery was removed, or the
Description contact point between the controller and the battery is degraded.
Recommended Make sure that the battery is present and properly connected. If the battery is present, wait for
Response Action a few minutes and re-check if the battery is detected. If the contact point between the battery
and the controller is degraded, you must replace the battery, the controller, or both. Refer to
the storage hardware documentation for information on how to safely access, or remove.
Contact technical support if the issue persists.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 2 (Warning)
Trap/EventID 4274
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter IPMI Alert SNMP
Visibility Alert
TRUE FALSE TRUE

BAT1001

Message Battery on
Email LC Log
Alert
TRUE TRUE
arg1 was removed.
• arg1 = controller name
Email LC Log
Alert
TRUE TRUE
arg1 was replaced.
LCD Power Off Power
Cycle
TRUE FALSE FALSE
LCD Power Off Power
Cycle
TRUE FALSE FALSE
Reset
FALSE
Reset
FALSE
71