Vlt0207; Vlt0208 - Dell PowerEdge VRTX Reference Manual

Category System Health
SubCategory VLT = Voltage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

VLT0207

Message The memory module
Arguments
Detailed System hardware detected an over voltage or under voltage condition. If multiple voltage
Description exceptions occur consecutively the system may power down in failsafe mode.
Recommended 1) Review system logs for power supply exceptions. 2) Reseat the memory module. 3) If the
Response Action problem persists, contact technical support. Refer to the product documentation to choose a
convenient contact method.
Category System Health
SubCategory VLT = Voltage
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message Memory module <number> <name> voltage is outside of range. Contact support
Initial Default. FALSE
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

VLT0208

Message The memory module
Arguments
912
Email LC Log
Alert
FALSE FALSE
arg1arg2 voltage is less than the lower critical threshold.
• arg1 = number
arg2 = name
•
Email LC Log
Alert
FALSE FALSE
arg1arg2 voltage is greater than the upper warning threshold.
arg1 = number
•
arg2 = name
•
LCD Power Off Power
Cycle
FALSE FALSE FALSE
LCD Power Off Power
Cycle
FALSE FALSE FALSE
Reset
FALSE
Reset
FALSE