Hwc1100; Hwc1101 - Dell PowerEdge VRTX Reference Manual

Dell poweredge vrtx chassis management controller firmware event message reference guide version 1.0
Hide thumbs Also See for PowerEdge VRTX:
Table of Contents

Advertisement

Detailed
The system has detected a mezzanine card that is not supported on this system.
Description
Recommended
1) Review system documentation for supported mezzanine cards. 2) Replace mezzanine card
Response Action
with a supported mezzanine card.
Category
System Health
SubCategory
HWC = Hardware Config
Severity
Severity 1 (Critical)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
FALSE
Filter
IPMI Alert SNMP
Visibility
Alert
FALSE
FALSE
FALSE

HWC1100

Message
The
Arguments
Detailed
None
Description
Recommended
No response action is required.
Response Action
Category
System Health
SubCategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
IPMI Alert SNMP
Visibility
Alert
TRUE
FALSE
TRUE

HWC1101

Message
The
Email
LC Log
Alert
FALSE
FALSE
arg1 was installed in slot arg2 .
arg1 = name
arg2 = number
Email
LC Log
Alert
TRUE
TRUE
arg1 is removed from slot arg2 .
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
LCD
Power Off Power
Cycle
FALSE
FALSE
FALSE
Reset
FALSE
Reset
FALSE
285

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents