Pwr8527; Pwr8528 - Dell PowerEdge VRTX Reference Manual

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PWR8527

Message Server slot power priorities changed - reallocating power.
Detailed Server slot power priorites were changed. Power to servers is being reallocated.
Description
Recommended No response action is required.
Response Action
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter IPMI Alert SNMP
Visibility Alert
FALSE FALSE FALSE

PWR8528

Message Unable to set Max Power Conservation Mode because the Server Based Power Management
mode is enabled.
Detailed The Max Power Conservation Mode can be enabled only when Server Based Power
Description Management Mode is diabled.
Recommended The Max Power Conservation Mode can be changed when Server Based Power Management
Response Action mode is disabled. Using the CMC Web UI, navigate to the Chassis Overview > Power >
Configuration page, then uncheck the Enable Server Based Power Management checkbox.
Retry the operation.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
Email LC Log LCD
Alert
FALSE TRUE FALSE
Email LC Log LCD
Alert
FALSE TRUE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
Power Off Power Reset
Cycle
FALSE FALSE FALSE
561