Version 6.2.1.1
debug ip msdp
Turn on MSDP debugging.
E-Series, Z-Series, S4810
Syntax
debug ip msdp {event peer address | packet peer address | pim}
To turn debugging off, use the no debug ip msdp {event peer address |
packet peer address | pim} command.
Parameters
event
address
packet
address
pim
Defaults
Not configured.
Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 6.2.1.1
ip msdp cache-rejected-sa
Enable a MSDP cache for the rejected source-active entries.
E-Series, Z-Series, S4810
ip msdp cache-rejected-sa {number}
Syntax
To clear the MSDP rejected source-active entries, use the no ip msdp cache-
rejected-sa {number} command followed by the ip msdp cache-rejected-sa
{number} command.
Parameters
number
Introduced
peer
Enter the keyword event followed by the peer address in a dotted
decimal format (A.B.C.D.).
peer
Enter the keyword packet followed by the peer address in a dotted
decimal format (A.B.C.D.).
Enter the keyword pim to debug advertisement from PIM.
Introduced on the Z9000.
Introduced on the S4810.
Introduced
Enter the number of rejected SA entries to cache. The range is 0 to
32766.
1089