Show Tech-Support (S-Series And Z-Series) - Dell Force10 S4810P Reference Manual

EF-7.6.1.2.bin
flash: 520962048 bytes total (40189952 bytes free)
FTOS#
Related
show version
Commands
show linecard
show environment (C-Series and E-Series)
show processes memory (C-Series and E-Series)
processes.

show tech-support (S-Series and Z-Series)

Display a collection of data from other show commands, necessary for Dell Force10 technical support to perform
troubleshooting on S-Series or Z-Series switches.
S-Series, Z-Series
Syntax show tech-support [stack-unit unit-id | page]
Parameters
stack-unit
page
save
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 7.8.1.0
Version 7.6.1.0
Usage
Without the page or stack-unit option, the command output is continuous. Use Ctrl-z to
Information
interrupt the command output.
190
15 -rwx 5832 Jul 25 2008 11:13:36 +00:00 startup-config.bak
16 -rwx 29947358 Jul 25 2008 11:04:26 +00:00 FTOS-
17 -rwx 10375 Aug 25 2008 10:55:18 +00:00 LauraSave
– displays the FTOS version.
– displays the line card(s) status.
(OPTIONAL) Enter the keywords stack-unit to view CPU memory
usage for the stack member designated by unit-id. The unit ID range
for the S4810 is 0-11. For all other S-Series, the range is 0-7.
(OPTIONAL) Enter the keyword page to view 24 lines of text at a time.
Press the SPACE BAR to view the next 24 lines. Press the ENTER key
to view the next line of text.
When using the pipe command ( | ), enter one of these keywords to
filter command output. For details about filtering commands, refer to
CLI Basics.
Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename. A
maximum of 20 characters.
Introduced on the Z9000.
Introduced save to the file options.
Introduced on the S-Series.
– displays the system component status.
– displays memory usage based on running