Cam-L2Acl (Configuration) - Dell Force10 S4810P Reference Manual

TeraScale
Syntax cam l2acl {chassis all | linecard number} {default | system-
flow percentage l2acl percentage pvst percentage qos percentage
l2pt percentage frrp percentage}
Command Modes EXEC Privilege
Command History
Version 8.3.1.0
Version 7.7.1.0

cam-l2acl (CONFIGURATION)

Re-allocate the amount of space, in percentage, for each Layer 2 ACL CAM sub-partition.
TeraScale
Syntax cam-l2acl {default | system-flow percentage l2acl percentage
pvst percentage qos percentage l2pt percentage frrp percentage}
Parameters
default
system-flow
percentage
l2acl
pvst
qos
l2pt
frrp
Command Modes CONFIGURATION
Command History
Version 7.7.1.0
COMMAND DEPRECATED
Introduced on the E-Series.
Enter the keyword default to reset the Layer 2 ACL CAM sub-
partition space allocations to the default values (Sysflow: 6, L2ACL:
14, PVST: 50, QoS: 12, L2PT: 13, FRRP: 5).
Allocate a percentage of the Layer 2 ACL CAM space for system flow
entries. Enter the keywords system-flow and specify the
percentage. The range is 5 to 100.
percentage
Allocate a percentage of the Layer 2 ACL CAM space for Layer 2 ACL
entries. Enter the keyword l2acl and specify the percentage. The
range is 5 to 95.
percentage
Allocate a percentage of the Layer 2 ACL CAM space for PVST+
entries. Enter the keyword pvst and specify the percentage. The
range is 5 to 95.
percentage
Allocate a percentage of the Layer 2 ACL CAM space for QoS entries.
Enter the keyword qos and specify the percentage. The range is 5 to
95.
percentage
Allocate a percentage of the Layer 2 ACL CAM space for L2PT
entries. Enter the keyword l2pt and specify the percentage. The
range is 5 to 95.
percentage
Allocate a percentage of the Layer 2 ACL CAM space for FRRP
entries. Enter the keyword frrp and specify a percentage. The
range is 5 to 95.
Introduced on the E-Series.
587