Show Ip Bgp Ipv6 Unicast Filter-List; Show Ip Bgp Ipv6 Unicast Flap-Statistics - Dell Force10 S4810P Reference Manual

Usage
To view the total number of COMMUNITY attributes found, use the show ip bgp
Information
summary command. The text line above the route table states the number of COMMUNITY
attributes found.
The show ip bgp community command without any parameters lists BGP routes with at
least one BGP community attribute and the output is the same as for the show ip bgp
command output.

show ip bgp ipv6 unicast filter-list

View the routes that match the filter lists.
C-Series, E-Series
Syntax show ip bgp ipv6 unicast filter-list as-path-name
Parameters
as-path-name
Command Modes
Command History
Version 8.2.1.0
Version 7.4.1.0

show ip bgp ipv6 unicast flap-statistics

View flap statistics on BGP routes.
C-Series, E-Series
Syntax show ip bgp ipv6 unicast flap-statistics [ipv6-address prefix-
length] [filter-list as-path-name] [regexp regular-expression]
Parameters
ipv6-address
prefix-length
filter-list
name
regexp
expression
Enter the name of an AS-PATH.
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
as-path-
(OPTIONAL) Enter the keywords filter-list followed by the
name of a configured AS-PATH ACL.
regular-
Enter a regular expression then use one or a combination of the
following characters to match:
•
•
•
. = (period) any single character (including a white space).
* = (asterisk) the sequences in a pattern (0 or more
sequences).
+ = (plus) the sequences in a pattern (1 or more sequences).
529