Dell Force10 S4810P Reference Manual page 780

pre-Version
6.2.1.0
Usage In the Example, the delta column displays changes since the last screen refresh.
Information
The following are the monitor command menu options.
Key
systest-3
monitor time
time
m
c
b
r
l
a
T
t
q
Example (Single
systest-3 Monitor time: 00:00:06 Refresh Intvl.: 2s Time:
Interface)
03:26:26
Interface: Gi 0/3, Enabled, Link is Up, Linespeed is 1000 Mbit
Traffic statistics:
Over 127B packets:
Over 255B packets:
Over 511B packets:
Over 1023B packets:
Input IP checksum:
780
Introduced on the E-Series.
Description
Displays the host name assigned to the system.
Displays the amount of time since the monitor interface
command was entered.
Displays the amount of time the chassis is up (since last reboot).
Change the view from a single interface to all interfaces on the line
card or visa-versa.
Refresh the view.
Change the counters displayed from Packets on the interface to
Bytes.
Change the [delta] column from change in the number of packets/
bytes in the last interval to rate per second.
Change the view to the next interface on the line card, or if in line
card mode, the next line card in the chassis.
Change the view to the previous interface on the line card, or if in
line card mode, the previous line card in the chassis.
Increase the screen refresh rate.
Decrease the screen refresh rate.
Return to the CLI prompt.
Input bytes:
Output bytes:
Input packets:
Output packets:
64B packets:
Over 64B packets:
Error statistics:
Input underruns:
Input giants:
Input throttles:
Input CRC:
Input overrun:
Current Rate
9069828 43 Bps
606915800 43 Bps
54001 0 pps
9401589 0 pps
67 0 pps
49166 0 pps
350 0 pps
1351 0 pps
286 0 pps
2781 0 pps
0 0 pps
0 0 pps
0 0 pps
0 0 pps
0 0 pps
0 0 pps
Delta
86
86
1
1
0
1
0
0
0
0
0
0
0
0
0
0