local
Defaults
Without any options, this command clears the entire source-active cache.
Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.1
Version 7.8.1.0
Version 7.7.1.0
Version 6.2.1.1
clear ip msdp statistic
Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or local
source-active entries.
E-Series, Z-Series, S4810
Syntax
clear ip msdp sa-cache [group-address | rejected-sa | local]
Parameters
group-address
rejected-sa
local
Defaults
Without any options, this command clears the entire source-active cache.
Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.1
Version 7.8.1.0
Version 7.7.1.0
1088
limit is configured, the RP or MSDP peer is unreachable, or because
of a format error.
Enter the keyword local to clear out local PIM advertised entries. It
applies the redistribute filter (if present) while adding the local PIM
SA entries to the SA cache.
Introduced on the Z9000.
Introduced on the S4810.
Added the local option.
Added the rejected-sa option.
Introduced
Enter the group IP address in dotted decimal format (A.B.C.D.).
Enter the keyword rejected-sa to clear the cache source-active
entries that are rejected because the RPF check failed, an SA filter or
limit is configured, the RP or MSDP peer is unreachable, or because
of a format error.
Enter the keyword local to clear out local PIM advertised entries. It
applies the redistribute filter (if present) while adding the local PIM
SA entries to the SA cache.
Introduced on the Z9000.
Introduced on the S4810.
Added the local option.
Added the rejected-sa option.