Dell Force10 S4810P Reference Manual page 673
Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)
Hide thumbs
Also See for Force10 S4810P:
- Manual (60 pages) ,
- Quick start manual (27 pages) ,
- Configuration manual (1144 pages)
Table of Contents
Advertisement
crc16 |
hg {
Z-Series only: Enter the keyword hg followed by one of the following
crc16cc |
options:
crc32MSB |
crc32LSB | xor1 |
xor2 | xor4 | xor8 |
xor16 } stack-unit
stack-unit-
number | port-set
port-pipe
Enter the keywords stack-unit, followed by a stack-unit number,
to specify a stack-unit. The range is 0 to 7.
Enter the keywords port-set port-pipe followed by the port
pipe number. The range is 0 to 5.
hg-seed
seed-
Z-Series only: Enter the keywords hg-seed followed by the hash
value stack-unit
algorithm seed value. The range is 0 to 2147483646.
Enter the keywords stack-unit followed by the stack unit number.
The range is 0 to 7.
Enter the keywords port-set followed by the line card's port-pipe
number. The range is 0 to 5.
hash
lag
TeraScale and ExaScale Only: Enter the keyword lag followed by the
algorithm value
LAG hash algorithm value. The range is 0 to 47.
hash
nh-ecmp
E-Series only: (OPTIONAL) Enter the keyword nh-ecmp followed by
algorithm value
the ECMP hash algorithm value.
linecard
number
E-Series only: (OPTIONAL) TeraScale and ExaScale Only: Enter the
keywordlinecard followed by the linecard slot number. The range
is:
•
xor4: Use CRC16_BISYNC_AND_XOR4 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor4
•
xor8: Use CRC16_BISYNC_AND_XOR8 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor8
•
xor16: Use CR16 - 16 bit XOR
•
crc16: Use CRC16_BISYNC - 16 bit CRC16-bisync polynomial
(default)
•
crc16cc: Use CRC16_CCITT - 16 bit CRC16 using CRC16-
CCITT polynomial
•
crc32MSB: Use CRC32_UPPER - MSB 16 bits of computed
CRC32
•
crc32LSB: Use CRC32_LOWER - LSB 16 bits of computed
CRC32
•
xor1: Use CRC16_BISYNC_AND_XOR1 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor1
•
xor2: Use CRC16_BISYNC_AND_XOR2 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor2
•
xor4: Use CRC16_BISYNC_AND_XOR4 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor4
•
xor8: Use CRC16_BISYNC_AND_XOR8 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor8
•
xor16: Use CR16 - 16 bit XOR
•
0 to 13 on an E1200/E1200i
•
0 to 6 on an E600/E600i
•
0 to 5 on an E300
673
Advertisement
Table of Contents
