Show Ip Bgp Ipv6 Unicast Flap-Statistics - Dell Force10 S4810P Reference Manual

show ip bgp ipv6 unicast flap-statistics

View flap statistics on BGP routes.
C-Series, E-Series
Syntax show ip bgp ipv6 unicast flap-statistics [ipv6-address prefix-
length] [filter-list as-path-name] [regexp regular-expression]
Parameters
ipv6-address
prefix-length
filter-list
name
regexp
expression
Command Modes
Command History
Version 7.4.1.0
Example
FTOS#show ip bgp ipv6 unicast flap-statistics
BGP table version is 8, local router ID is 5.5.10.4
Status codes: s suppressed, S stale, d damped, h history, *
valid, > best Path
source: I - internal, a - aggregate, c - confed-external, r -
redistributed, n -
network Origin codes: i - IGP, e - EGP, ? - incomplete
h
h
556
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
as-path-
(OPTIONAL) Enter the keywords filter-list followed by the
name of a configured AS-PATH ACL.
regular-
Enter a regular expression then use one or a combination of the
following characters to match:
•
•
•
•
•
•
•
• EXEC
• EXEC Privilege
Introduced
Network From
dead:1::/100 5ffe:10::3
dead:1::/100 5ffe:11::3
. = (period) any single character (including a white space).
* = (asterisk) the sequences in a pattern (0 or more
sequences).
+ = (plus) the sequences in a pattern (1 or more sequences).
? = (question mark) sequences in a pattern (either 0 or 1
sequences).
NOTE: You must enter an escape sequence (CTRL+v) prior
to entering the ? regular expression.
[ ] = (brackets) a range of single-character patterns.
^ = (caret) the beginning of the input string. If you use the
caret at the beginning of a sequence or range, it matches on
everything BUT the characters specified.
$ = (dollar sign) the end of the output string.
Flaps Duration Reuse Path
1 00:03:20
1 00:03:20
1 i
1 i