Show Processes Cpu (S-Series) - Dell Force10 S4810P Reference Manual

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 S4810P:

Table of Contents

0x00000020 2250

show processes cpu (S-Series)

Display CPU usage information based on processes running in an S-Series or Z-Series.

S-Series, Z-Series

show processes cpu [management-unit 1-99 [details] | stack-unit

id | summary | ipc | memory [stack-unit id]]

management-unit

1-99 [details]

(OPTIONAL) Display processes running in the control processor. The

1-99 variable sets the number of tasks to display in order of the

highest CPU usage in the past five (5) seconds. Add the keyword

details to display all running processes (except sysdlp). Refer to

Example (management-unit).

(OPTIONAL) Enter the keyword stack-unit followed by the stack

As an option of the show processes cpu command, this option

displays CPU usage for the designated stack member. Or, as an

option of the command, this option limits the output of memory

statistics to the designated stack member.

Refer to Example (stack-unit). The unit ID range for the S4810 is 0 to

(OPTIONAL) Enter the keyword summary to view a summary view of

CPU usage for all members of the stack. Refer to Example (summary).

(OPTIONAL) Enter the keyword ipc to display interprocess

communication statistics.

(OPTIONAL) Enter the keyword memory to display memory statistics.

Refer to Example (memory).

10000 0.00% 0.00% 0.00% 0

0 0.00% 0.00% 0.00% 0

10000 0.00% 0.00% 0.00% 0

0 0.00% 0.00% 0.00% 0

10000 0.00% 0.00% 0.00% 0

0 0.00% 0.00% 0.00% 0

10000 0.00% 0.00% 0.00% 0

0 0.00% 0.00% 0.00% 0

10000 0.00% 0.00% 0.00% 0

0 0.00% 0.00% 0.00% 0

10000 0.00% 0.00% 0.00% 0