Show Dcb; Show Interface Pfc - Dell Force10 S4810P Reference Manual

show dcb

Displays the data center bridging status, the number of PFC-enabled ports, and the number of PFC-enabled queues.
S4810
Syntax show dcb [stack-unit unit-number] [port-set port-set port-set
number]
Parameters
unit number
port-set number
Command Modes EXEC Privilege
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage Specify a stack-unit number on the Master switch in a stack.
Information
Example
FTOS# show dcb
stack-unit 0 port-set 0
PFC Queue Count : 2 (current), 2 (configured)

show interface pfc

Displays the PFC configuration applied to ingress traffic on an interface, including priorities and link delay.
S4810
Syntax show interface port-type slot/port pfc {summary | detail}
Parameters
port-type slot/
port pfc
{summary | detail}
Command Modes INTERFACE
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage
To clear the PFC TLV counters, use the clear pfc counters interface port-
Information
type slot/port command.
Enter the DCB unit number. The range is 0 to 5.
Enter the port-set number.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
Enter the port-type slot and port PFC information.
Enter the keyword summary for a summary list of results or enter the
keyword detail for a full list of results.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
603