Default-Information Originate - Dell Force10 S4810P Reference Manual

Field
hi:
di:
dr:
bdr:
Example
FTOS#debug ip ospf 1 packet
OSPF process 90, packet debugging is on
FTOS#
08:14:24 : OSPF(100:00):
Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1
224.0.0.5

default-information originate

Configure the FTOS to generate a default external route into an OSPF routing domain.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax default-information originate [always] [metric metric-value]
[metric-type type-value] [route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always
metric
value
metric-type
value
route-map
name
Defaults Disabled.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
1152
Description
•
•
Displays the amount of time configured for the HELLO interval.
Displays the amount of time configured for the DEAD interval.
Displays the IP address of the designated router.
Displays the IP address of the Border Area Router.
aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Gi 4/3 dst:
netmask:255.255.255.0 pri:1 N-, MC-, E+, T-,
hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0
(OPTIONAL) Enter the keyword always to specify that default route
information must always be advertised.
metric-
(OPTIONAL) Enter the keyword metric followed by a number to
configure a metric value for the route. The range is 1 to 16777214.
type-
(OPTIONAL) Enter the keywords metric-type followed by an
OSPF link state type of 1 or 2 for default routes. The values are:
•
•
map-
(OPTIONAL) Enter the keywords route-map followed by the name
of an established route map.
Introduced on the Z9000.
T + (router can support TOS)
T - (router cannot support TOS)
1 = Type 1 external route
2 = Type 2 external route