Dell Force10 S4810P Reference Manual page 975

To disable the generation of a default route into the specified IS-IS routing domain, use the no
default-information originate [always] [metric metric] [route-
map map-name] command.
Parameters
always
metric
route-map
name
Defaults Not configured.
Command Modes
Command History
Version 8.3.12.0
Version 7.5.1.0
Version 6.3.1.0
Usage
When you use this command to redistribute routes into a routing domain, the router becomes
Information
an autonomous system (AS) boundary router. An AS boundary router does not always generate
a default route into a routing domain. The router still requires its own default route before it can
generate one.
How a metric value assigned to a default route advertises depends on the metric-style
command configuration. If the metric-style command is set for Narrow mode and the
metric value in the default-information originate command is set to a number
higher than 63, the metric value advertised in the LSPs is 63. If the metric-style command
is set for Wide mode, the metric value in the default-information originate
command is advertised.
Related
Commands
(OPTIONAL) Enter the keyword always to have the default route
always advertised.
metric
(OPTIONAL) Enter the keyword metric followed by a number to
assign to the route. The range is 0 to 16777215.
map-
(OPTIONAL) A default route is generated by the routing process if the
route map is satisfied.
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Introduced on the S4810.
Added IPv6 ISIS support.
Introduced.
• redistribute – redistributes routes from one routing domain to another routing domain.
• isis metric – configures a metric for an interface.
• metric-style – sets the metric style for the router.
• show isis database – displays the IS-IS link state database.
975