Disable; Dns-Server; Domain-Name - Dell Force10 S4810P Reference Manual

disable

Disable the DHCP server.
C-Series, S-Series, Z-Series, S4810
Syntax disable
DHCP Server is disabled by default. Enable the system to be a DHCP server using the no
disable command.
Defaults Disabled
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0

dns-server

Assign a DNS server to clients based on address pool.
C-Series, S-Series, Z-Series, S4810
Syntax dns-server address [address2...address8]
Parameters
address
Defaults none
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0

domain-name

Assign a domain to clients based on the address pool.
C-Series, S-Series, Z-Series, S4810
Syntax domain-name name
Parameters
name
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the a list of DNS servers that may service clients on the subnet.
You may list up to eight servers, in order of preference.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Give a name to the group of addresses in a pool.
655