Capture Bgp-Pdu Max-Buffer-Size - Dell Force10 S4810P Reference Manual

Parameters
ipv6-address
direction {both |
rx | tx}
Defaults Not configured.
Command Modes
Command History
Version 8.2.1.0
Version 7.5.1.0
Related
Commands

capture bgp-pdu max-buffer-size

Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
C-Series, E-Series
Syntax capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000
Defaults 40960000 bytes
Command Modes
Command History
Version 8.2.1.0
Version 7.5.1.0
Related
Commands
Enter the IPv6 address of the target BGP neighbor.
Enter the keyword direction and a direction— either rx for
inbound, tx for outbound, or both.
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
• clear ip bgp – enables route reflection between route reflector and clients.
• show capture bgp-pdu neighbor
• capture bgp-pdu neighbor
Enter a size for the capture buffer.
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
• show capture bgp-pdu neighbor
• capture bgp-pdu neighbor
– configures a route reflector and clients.
– enables capture of an IPv4 BGP neighbor packet.
– configures a route reflector and clients.
– enables capture of an IPv4 BGP neighbor packet.
489