Distance Bgp; Ipv6 Prefix-List - Dell Force10 S4810P Reference Manual

Related router bgp
Commands

distance bgp

Configure three administrative distances for routes.
C-Series, E-Series
Syntax distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-distance
internal-distance
local-distance
Defaults
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
Information
The higher the administrative distance assigned to a route means that your confidence in that
route is low. Routes assigned an administrative distance of 255 are not installed in the routing
table.
Routes from confederations are treated as internal BGP routes.

ipv6 prefix-list

Configure an IPv6 prefix list.
Z-Series, S4810
Syntax ipv6 prefix-list prefix-list name
Parameters
prefix-list name
– Enter ROUTER mode on the switch.
Enter a number to assign to routes learned from a neighbor external
to the AS. The range is 1 to 255. The default is 20.
Enter a number to assign to routes learned from a router within the
AS. The range is 1 to 255. The default is 200.
Enter a number to assign to routes learned from networks listed in the
network command. The range is 1 to 255. The default is 200.
• external-distance = 20
• internal-distance = 200
• local-distance = 200
Introduced on the E-Series ExaScale.
Introduced
CAUTION: Dell Force10 recommends that you do not change the administrative distance of
internal routes. Changing the administrative distances may cause routing table
inconsistencies.
Enter the name of the prefix list.
501