Set Metric; Set Metric-Type - Dell Force10 S4810P Reference Manual

Usage The set local-preference command changes the LOCAL_PREF attribute for routes
Information meeting the route map criteria. To change the LOCAL_PREF for all routes, use the bgp
default local-preference command.
Related bgp default local-preference
Commands

set metric

Configure a filter to assign a new metric to redistributed routes.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax set metric [+ | -] metric-value
To delete a setting, enter no set metric.
Parameters
+
-
metric-value
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related
set automatic-tag
Commands
set level

set metric-type

set tag
set metric-type
Configure a filter to assign a new route type for routes redistributed to OSPF.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax set metric-type {internal | external | type-1 | type-2}
320
– changes the default LOCAL_PREF attribute for all routes.
(OPTIONAL) Enter + to add a metric-value to the redistributed routes.
(OPTIONAL) Enter - to subtract a metric-value from the redistributed
routes.
Enter a number as the new metric value. The range is zero (0) to
4294967295.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– computes the tag value of the route.
– specifies the OSPF area for route redistribution.
– specifies the route type assigned to redistributed routes.
– specifies the tag assigned to redistributed routes.