Dell Force10 S4810P Reference Manual page 1130

active [
count
address [source
source-address ]}
Command Modes
Command History
Version 7.4.1.0
Example
FTOS#show ipv6 mroute
IP Multicast Routing Table
(165:87:32::30, ff05:100::1), uptime 00:01:11
(165:87:37::30, ff05:200::1), uptime 00:01:04
(165:87:31::30, ff05:300::1), uptime 00:01:19
(165:87:32::30, ff05:1100::1), uptime 00:01:08
(165:87:37::30, ff05:2200::1), uptime 00:01:01
FTOS#
Example (Active)
FTOS#show ipv6 mroute active 10
Active Multicast Sources - sending >= 10 pps
Group: ff05:300::1
Group: ff05:3300::1
Group: ff3e:300::4000:1
Group: ff3e:3300::4000:1
1130
rate ]
(OPTIONAL) Enter the keyword active to view active multicast
sources. Enter a rate to view active routes over the specified rate.
The range is 0 to 10000000 packets/second.
group-
(OPTIONAL) Enter the keyword count to view the number of IPv6
multicast routes and packets on the E-Series. Optionally, enter the
IPv6 source-address count information.
• EXEC
• EXEC Privilege
Introduced.
Incoming interface: Vlan 200
Outgoing interface list:
GigabitEthernet 2/14
Incoming interface: Port-channel 200
Outgoing interface list:
Vlan 200
Incoming interface: GigabitEthernet 2/14
Outgoing interface list:
Port-channel 200
Incoming interface: Vlan 200
Outgoing interface list:
GigabitEthernet 2/14
Incoming interface: Port-channel 200
Outgoing interface list:
Vlan 200
Source: 165:87:31::30
Rate: 100 pps
Source: 165:87:31::30
Rate: 100 pps
Source: 165:87:31::20
Rate: 100 pps