Show Processes Memory (C-Series And E-Series) - Dell Force10 S4810P Reference Manual

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 S4810P:

Table of Contents

ACL_AGENT0 PIM0

ACL0 MACAGENT0

IFMGR0 EVENTTERMLOG0 0

DIFFSERV0 ACL_AGENT0 0

!---------------output truncated -----------------------!

show processes memory (C-Series and E-Series)

View memory usage information based on processes running in the system.

C-Series, E-Series

show processes memory [cp | lp slot-number {lp all | lp

summary} | rp1 | rp2]

(OPTIONAL) Enter the keyword cp to view memory usage of the

control processor.

(OPTIONAL) Enter the keyword lp and the slot number to view

information on the line-card processor in that slot. For the C-Series,

the range is 0 to 7. For the E-Series, the range is 0 to 13 on the E1200/

E1200i, 0 to 6 on the E600/E600i, and 0 to 5 on the E300.

(OPTIONAL) Enter the keyword lp all to view CP memory usage

on all active line cards.

(OPTIONAL) Enter the keyword lp summary to view a summary of the

line card CP memory usage.

(OPTIONAL) Enter the keyword rp1 to view memory usage of the

Route Processor 1.

NOTE: This option is supported on the E-Series only.