Dell Force10 S4810P Reference Manual page 410

Parameters
ipv4 unicast
network
network-mask
longer-prefixes
Command Modes
Command History
Version 8.3.11.1
Version 8.3.8.0
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage When you enable the bgp non-deterministic-med command, the show ip bgp
Information command output for a BGP route does not list the INACTIVE reason.
The following describes the show ip bgp command shown in the Example below.
Field
Network
Next Hop
Metric
LocPrf
Weight
Path
Example
FTOS>show ip bgp
BGP table version is 847562, local router ID is 63.114.8.131
Status codes: s suppressed, d damped, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
*>
*
410
(OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
(OPTIONAL) Enter the network address (in dotted decimal format) of
the BGP network to view information only on that network.
(OPTIONAL) Enter the network mask (in slash prefix format) of the
BGP network address.
(OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Added the add-path option to the S4810. Output on the S4810
shows the ADDPATH parameters.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the destination network prefix of each BGP route.
Displays the next hop address of the BGP router. If 0.0.0.0 is listed in
this column, then local routes exist in the routing table.
Displays the BGP route's metric, if assigned.
Displays the BGP LOCAL_PREF attribute for the route.
Displays the route's weight.
Lists all the ASs the route passed through to reach the destination
network.
Network Next Hop
0.0.0.0/0 63.114.8.33
3.0.0.0/8 63.114.8.33
Metric LocPrf Weight Path
0 18508 i
0 18508 209