Metric-Style; Multi-Topology - Dell Force10 S4810P Reference Manual

metric-style

Configure a router to generate and accept old-style, new-style, or both styles of type, length, and values (TLV).
E-Series, S4810
Syntax metric-style {narrow [transition] | transition | wide
[transition]} [level-1 | level-2]
To return to the default values, use the no metric-style {narrow [transition]
| transition | wide [transition]} [level-1 | level-2] command.
Parameters
narrow
transition
wide
level-1
level-2
Defaults narrow; if no Level is specified, Level-1 and Level-2 are configured.
Command Modes ROUTER ISIS
Command History
Version 8.3.12.0
Usage
If you enter the metric-style wide command, the FTOS generates and accepts only
Information
new-style TLVs. The router uses less memory and other resources rather than generating both
old-style and new-style TLVs.
The new-style TLVs have wider metric fields than old-style TLVs.
Related isis metric
Commands

multi-topology

Enables multi-topology IS-IS. It also allows enabling/disabling of old and new style TLVs for IP prefix information in the
LSPs.
E-Series, S4810
Syntax multi-topology [transition]
To return to a single topology configuration, use the no multi-topology
[transition] command.
Allows you to configure the E-Series to generate and accept old-style
TLVs. The metric range is 0 to 63.
Allows you to configure the E-Series to generate both old-style and
new-style TLVs. The metric range is 0 to 63.
Allows you to configure the E-Series to generate and accept only
new-style TLVs. The metric range is 0 to 16777215.
Enables the metric style on Level 1.
Enables the metric style on Level 2.
Introduced on the S4810.
– use this command to configure a metric for an interface.
999