Neighbor Filter-List; Neighbor Maximum-Prefix - Dell Force10 S4810P Reference Manual

neighbor filter-list

Configure a BGP filter based on the AS-PATH attribute.
C-Series, E-Series
Syntax neighbor {ipv6-address | peer-group-name} filter-list as-path-
name {in | out}
To delete a BGP filter, use the no neighbor {ipv6-address | peer-group-
name} filter-list as-path-name {in | out} command.
Parameters
ipv6-address
peer-group-name
as-path-name
in
out
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0
Version 7.4.1.0

neighbor maximum-prefix

Control the number of network prefixes received.
C-Series, E-Series
Syntax neighbor {ipv6-address | peer-group-name} maximum-prefix
maximum [threshold] [warning-only]
To return to the default values, use the no neighbor {ipv6-address | peer-
group-name} maximum-prefix maximum [threshold] [warning-only]
command.
Parameters
ipv6-address
508
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Enter the name of the peer group to apply the filter to all routers in the
peer group.
Enter the name of an established AS-PATH access list. If you do not
configure the AS-PATH access list, the default is permit (to allow
routes). The maximum is 16 characters.
Enter the keyword in to filter inbound BGP routes.
Enter the keyword out to filter outbound BGP routes.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.