Show Ip Igmp Snooping Mrouter - Dell Force10 S4810P Reference Manual

need to be routed. You must assign an IP address to the VLAN interface for the switch to act as
a querier for this VLAN.

show ip igmp snooping mrouter

Display multicast router interfaces.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip igmp snooping mrouter [vlan number]
Parameters
vlan
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command.
Usage If the port channel is a VLT port channel, an asterisk (*) after the port channel number (Po 100*)
Information indicates the port channel is locally down and that a remote VLT port is up.
Example
FTOS#show ip igmp snooping mrouter
Interface Router Ports
Vlan 2 Gi 13/3, Po 1
FTOS#
Related
Commands
756
number
Enter the keyword vlan followed by the vlan number. The range is 1
to 4094.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
• ip igmp snooping mrouter
multicast router.
• show ip igmp groups – use this IGMP command to view groups.
– Use this command to configure a static connection to the