Spanning-Tree Msti - Dell Force10 S4810P Reference Manual

pre-Version
6.2.1.0

spanning-tree msti

Configure multiple spanning tree instance cost and priority for an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax spanning-tree msti instance {cost cost | priority priority}
Parameters
msti
cost
priority
Defaults
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.5.1.0
Introduced on the E-Series.
instance
Enter the keyword msti and the MST instance number. The range is
zero (0) to 63.
cost
(OPTIONAL) Enter the keyword cost followed by the port cost value.
The range is 1 to 200000. The defaults are:
•
•
•
•
•
•
•
•
•
priority
Enter keyword priority followed by a value in increments of 16 as
the priority. The range is 0 to 240. The default is 128.
• cost = depends on the interface type
• priority = 128
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
100 Mb/s Ethernet interface = 200000
1-Gigabit Ethernet interface = 20000
10-Gigabit Ethernet interface = 2000
Port Channel interface with one 100 Mb/s Ethernet = 200000
Port Channel interface with one 1-Gigabit Ethernet = 20000
Port Channel interface with one 10-Gigabit Ethernet = 2000
Port Channel with two 1-Gigabit Ethernet = 18000
Port Channel with two 10-Gigabit Ethernet = 1800
Port Channel with two 100-Mbps Ethernet = 180000
1113