Dell Force10 S4810P Reference Manual page 710

Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.4.1.0
Usage Executing this command without the optional ring-id command clears the statistics
Information
counters on all the available rings. FTOS requires a command line confirmation before the
command executes. This commands clears the following counters:
Usage Executing this command without the optional ring-id command clears the statistics
Information counters on all the available rings. FTOS requires a command line confirmation before the
command is executed. This commands clears the following counters:
Example FTOS#show frrp summary
(Summary)
Ring-ID State Mode
----------------------------------------------
2
31
50
FTOS#
Example (1)
FTOS#show frrp 1
Ring protocol 1 is in Master mode
Ring Protocol Interface:
Primary : GigabitEthernet 0/16 State: Forwarding
Secondary: Port-channel 100 State: Blocking
Control Vlan: 1
Ring protocol Timers: Hello-Interval 50 msec Dead-Interval 150
msec
Ring Master's MAC Address is 00:01:e8:13:a3:19
Topology Change Statistics: Tx:110 Rx:45
Hello Statistics: Tx:13028 Rx:12348
Number of state Changes: 34
Member Vlans: 1000-1009
FTOS#
Example (2 FTOS#show frrp 2 summary
Summary)
FTOS#show frrp 2 summary
Ring-ID State Mode
-----------------------------------------------
2
FTOS#
Related protocol frrp
Commands
710
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
• hello Rx and Tx counters
• Topology change Rx and Tx counters
• The number of state change counters
• hello Rx and Tx counters
• Topology change Rx and Tx counters
• The number of state change counters
Ctrl_Vlan Member_Vlans
UP Master
UP Transit
Down Transit
Ctrl_Vlan Member_Vlans
Up Master 2
— enters the resilient ring protocol and designate a ring identification.
2 11-20, 25,27-30
31 40-41
50 32
11-20, 25, 27-30