Bgp Confederation Peers; Bgp Dampening - Dell Force10 S4810P Reference Manual

Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
The autonomous systems configured in this command are visible to the EBGP neighbors. Each
Information
autonomous system is fully meshed and contains a few connections to other autonomous
systems. The next hop, MED, and local preference information is preserved throughout the
confederation.
FTOS accepts confederation EBGP peers without a LOCAL_PREF attribute. The software sends
AS_CONFED_SET and accepts AS_CONFED_SET and AS_CONF_SEQ.

bgp confederation peers

Specify the autonomous systems (ASs) that belong to the BGP confederation.
C-Series, E-Series
Syntax bgp confederation peers as-number [...as-number]
To cancel this command, use the no bgp confederation peer command.
Parameters
as-number
...as-number
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
The autonomous systems configured in this command are visible to the EBGP neighbors. Each
Information
autonomous system is fully meshed and contains a few connections to other autonomous
systems.
After specifying autonomous systems numbers for the BGP confederation, recycle the peers to
update their configuration.
Related bgp confederation identifier
Commands

bgp dampening

Enable BGP route dampening and configure the dampening parameters.
C-Series, E-Series
Syntax bgp dampening [half-life reuse suppress max-suppress-time]
[route-map map-name]
Introduced on the E-Series ExaScale.
Introduced
Enter the AS number. The range is 1 to 65535.
(OPTIONAL) Enter up to 16 confederation numbers. The range is 1 to
65535.
Introduced on the E-Series ExaScale.
Introduced
– configures a confederation ID.
481