Description; Default Vlan-Id - Dell Force10 S4810P Reference Manual

Occasionally, while sending broadcast traffic over multiple Layer 3 VLANs, the VRRP state of a VLAN interface may
continually switch between Master and Backup.
NOTE: For more information, refer to
Interfaces chapter.

description

Add a description about the selected VLAN.
C-Series, E-Series, S-Series
Syntax description description
Parameters
description
Defaults none
Command Modes INTERFACE VLAN
Command History
Version 7.6.1.0
Version 6.3.1.1
Related show vlan
Commands

default vlan-id

Specify a VLAN as the Default VLAN.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax default vlan-id vlan-id
To remove the default VLAN status from a VLAN and VLAN 1 does not exist, use the no
default vlan-id vlan-id syntax.
Parameters
vlan-id
Defaults The Default VLAN is VLAN 1.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
VLAN Stacking and VLAN-related commands, such as
Enter a text string description to identify the VLAN (80 characters
maximum).
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
– displays the VLAN configuration.
Enter the VLAN ID number of the VLAN to become the new Default
VLAN. The range is 1 to 4094. The default is 1.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
portmode hybrid in the
1049