Show Interface Dcbx Detail - Dell Force10 S4810P Reference Manual

show interface dcbx detail

Displays the DCBX configuration on an interface.
S4810
Syntax show interface port-type slot/port dcbx detail
Parameters
port-type
slot/port
Command Modes EXEC Privilege
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage
To clear DCBX frame counters, use the clear dcbx counters interface stack-
Information
unit/port command.
The following describes the show interface dcbx detail command shown in the
Example below.
Field
Interface
Port-Role
DCBX Operational
Status
Configuration
Source
Local DCBX
Compatibility mode
Local DCBX
Configured mode
Peer Operating
version
Local DCBX TLVs
Transmitted
Local DCBX Status:
DCBX Operational
Version
Enter the port type.
Enter the slot/port number.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Interface type with chassis slot and port number.
Configured the DCBX port role: auto-upstream, auto-downstream,
config-source, or manual.
Operational status (enabled or disabled) used to elect a
configuration source and internally propagate a DCB configuration.
The DCBX operational status is the combination of PFC and ETS
operational status.
Specifies whether the port serves as the DCBX configuration source
on the switch: true (yes) or false (no).
DCBX version accepted in a DCB configuration as compatible. In
auto-upstream mode, a port can only receive a DCBX version
supported on the remote peer.
DCBX version configured on the port: CEE, CIN, IEEE v2.5, or Auto
(port auto-configures to use the DCBX version received from a peer).
DCBX version that the peer uses to exchange DCB parameters.
Transmission status (enabled or disabled) of advertised DCB TLVs
(see TLV code at the top of the show command output).
DCBX version advertised in Control TLVs.
629