Permit Regex - Dell Force10 S4810P Reference Manual

IPADDR:NN
Defaults Not configured.
Command Modes CONFIGURATION (conf-ext-community-list)
Command History
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0
Related
deny
Commands
show ip bgp extcommunity-list

permit regex

This features allows you specify an extended communities to forward (permit) using a regular expressions (regex).
C-Series, E-Series, S-Series, Z-Series
Syntax permit regex {regex}
To remove, use the no permit regex {regex} command.
Parameters
regex
Defaults Not configured.
Command Modes CONFIGURATION (conf-ext-community-list)
Command History
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0
Usage Duplicate commands are silently accepted.
Information
Example
FTOS(conf-ext-community-list)#permit regexp 123
FTOS(conf-ext-community-list)#
Related deny regex
Commands
470
Enter the IP address specific extended community in the format
IPADDR:NN (4-byte IPv4 Unicast Address:2-byte community value).
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– configures to delete (deny) rules.
– displays the extended community list.
Enter a regular expression.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– denies a community using a regular expression.