Avaya Communication Manager Administrator's Manual page 1213

Send Name
Specifies whether the calling/connected/called/busy party's administered name is sent to the
network on outgoing/incoming calls. Valid entries are y, n, or r (restricted). The value r indicates
that the calling/connected name will be sent by Avaya Communication Manager, but will be
marked "presentation restricted." This value is valid only if the Supplementary Service
Protocol field is a (national supplementary service), b (for called/busy only) or d for the QSIG
Global Networking Supplementary Service Protocol. When the Supplementary Service
Protocol field is e (DCS with Rerouting), only values of y and n are permitted.
When the Send Name field in n, an incoming name is not tandemed out again if the
Supplementary Service Protocol field is any value other than b (QSIG). Similarly, when Send
Name is r (restricted), an incoming name is marked restricted when it is tandemed out again.
However, if the Supplementary Service Protocol field is b (QSIG), then an incoming name is
passed on unchanged and the Send Name field is ignored.
Note:
If name information is not administered for the calling station or the connected/
Note:
called/busy station, the system sends the extension number in place of the name.
Send UCID
Specifies whether or not the trunk should transmit Universal Call IDs. The valid entries are y
and n.
Send UUI IE
Specifies whether to block sending UUI information on a per trunk group basis. The valid entries
are y and n.
US NI Delayed Calling Name Update
Administrable if, on the System-Parameters Customer-Options screen, the ISDN-PRI field is
y, and on the Trunk Group screen, the Carrier Medium field is either PRI/BRI or ATM, and the
Supplementary Service Protocol field is a. This field provides display updates to the
terminating telephone for delayed calling party name provided by the network.
Valid entries
y
n
Usage
If calling name information is received after the incoming call has been
delivered to the terminating telephone, there is a display update.
Note: BRI trunks do not support this value.
If calling name information is received after the incoming call has been
delivered to the called telephone, there is no display update to the
terminating telephone.
ISDN Trunk Group
Issue 2.1 May 2006 1213