Avaya Communication Manager Administrator's Manual page 1693

Conferencing is n, an asterisk (*) appears next to the field name, indicating that this field
follows VDN override rules when the system changes the "active" VDN for a call.
Valid entries
1 to 999 or blank
Acceptable Service Level (sec)
Only appears when, on the System-Parameters Customer-Options screen, the BCMS/
VuStats Service Level field is y and the Measured field is set to internal or both.
Valid entries
0 to 9999
seconds
or blank
Allow VDN Override
This field appears if the Meet-me Conferencing field is n. The Allow VDN Override field
allows the system to change the "active" VDN for a call. The "active" VDN is the VDN to be used
for parameters associated with the call such as VDN name, skills, tenant number, BSR
application, VDN variables, etc.
Parameters (VDN fields) for the call that are defined by the "active" VDN include the fields in the
following list. When Meet-me Conferencing is n, an asterisk (*) appears next to each field
name, indicating that the field follows VDN override rules when the system changes the "active"
VDN for a call.
VDN Name
●
Tenant Number (TN)
●
VDN of Origin Announcement Extension
●
VDN skills (1st, 2nd, 3rd)
●
Return Destination
●
VDN Timed ACW Interval
●
BSR Application
●
BSR Available Strategy
●
BSR Tie Strategy
●
Display VDN for Route-to DAC
●
Usage
Enter the desired Skill numbers in each field (or leave blank). The default
is blank.
Usage
Enter the number of seconds within which calls to this VDN should be
answered. This allows BCMS to report the percentage of calls that were
answered within the specified time. The default is blank.
Vector Directory Number
Issue 2.1 May 2006 1693