Avaya Communication Manager Administrator's Manual page 1187

Valid entries
SAT
SYS_PRINT
IP Services screen - Session Layer Timers page
Use this screen to enable reliable protocol for TCP/IP links, and to establish other session-layer
parameters. This screen only appears if you enter CDR1, CDR2, PMS_JOURNAL, or
PMS_LOG in the Service Type field on page 1 or 2.
Figure 418: IP Services screen - Session Layer Timer page
change ip-services
Service
Type
CDR1
Connectivity Timer
Valid entries
1 to 255
Packet Resp Timer
Valid entries
1 to 255
Usage
System administration terminal.
Use this to connect the system printer over a TCP/IP link.
Reliable Packet Resp
Protocol Timer
y 3
Usage
Indicates the amount of time (in seconds) that the link can be idle before
Communication Manager sends a connectivity message to ensure the link
is still up.
Usage
Determines the number of seconds to wait from the time a packet is sent
until a response (acknowledgement) is received from the far-end, before
trying to resend the packet.
SESSION LAYER TIMERS
Session Connect
Message Cntr
1
IP Services
2 of 2
Page 3 of x
SPDU Connectivity
Cntr Timer
1 1
Issue 2.1 May 2006 1187