Screen Reference
Enable QoS
Valid entries
y/n
Ignore Connectivity in Server Arbitration
Valid entries
y/n
IP Control
Use this field to administer IP control of port networks.
Note:
In Phase 1 of the S8400, this field is display-only and is set to y. This is because,
Note:
in phase 1, the S8400 is a single port network. The IPSI functionality must
therefore be turned on to support the port network. In phase 2 of the S8400,
when duplication will be supported, this restriction will be removed.
Valid entries
y
n
1180 Administrator Guide for Avaya Communication Manager
Usage
Enter y to turn on quality of service (QoS) from the S8700 Series Media
Server to the IPSI link.
If you enable QoS for the control network, also enable it from the Web
interface using Server Configuration and Upgrades > Configure
Server and on each IPSI interface.
Usage
Default is n.
Usage
All port networks have an IPSI that provides control.
display-only, if IP-PNC is y on the System Parameters Customer
●
Options screen
A DS1 Converter (DS1C) circuit pack cannot be added to a port
●
network when IP Control is y
This IPSI is used only for Tone Clock / Tone Detector functions
remaining fields on this screen do not appear when IP Control is n
●
and IP-PNC is n on the System Parameters Customer Options
screen
n when the port network contains a DS1 Converter (DS1C) circuit
●
pack