Avaya Communication Manager Administrator's Manual page 1401

Secure SIP
Valid entries
y/n
Service/Feature
Enter up to 15 characters to identify the Service/Feature carried by the information element (IE)
in a call in this route pattern. This field is required by Call-by-Call Service Selection, and
Network Call Redirection and Transfer.
Service/Feature appears when ISDN-PRI or ISDN-BRI Trunks is y on the
System-Parameters Customer-Options screen.
Valid entries
accunet
i800
inwats
lds
mega800
megacom
Usage
Specify whether the SIP or SIPS prefix will be used, if the call is routed to
a SIP Enablement Services (SES) trunk preference. If SES trunks are not
specified on the Route Pattern screen, the call will be routed over
whatever trunk is specified. Therefore, to ensure a SES TLS connection
when such a route pattern is invoked, only SES trunks should be
specified. The only instance for entering y in this field is when the source
provider requires a secure SIP protocol. Default is n.
multiquest
operator
oper-lds (operator and lds)
oper-meg
(operator and megacon)
oper-sdn
(operator and sdn)
outwats-bnd
sdn (Enter to allow Network Call
Redirection/Transfer)
sub-operator
sub-op-lds
(sub-operator and lds)
sub-op-meg
(sub-operator and megacom)
sub-op-sdn
(sub-operator and sdn)
wats-max-bnd
Issue 2.1 May 2006
Route Pattern
1401