Avaya Communication Manager Administrator's Manual page 1005

Mode Code Interface
Note:
If you make a change to this field, you must log off and log back on to effect the
Note:
permission changes to get to the
page 1295.
Valid entries
y/n
Night Service Disconnect Timer (seconds)
Valid entries
10 to 1024 or
blank
Public Network Trunks on Conference Call
Indicates the number of public network trunks allowed on a conference call
.
Valid entries
0 to 5
Reset Shift Timer (seconds)
Used only for station-to-station calls or private network calls using ISDN trunks.
Valid entries
0 to 255
Usage
A y entry allows you to use the Mode Code Voice Mail System Interface to
connect the server running Communication Manager over a DTMF
interface to INTUITY AUDIX or other vendors' voice-mail systems.
Usage
Enter a number or blank to indicate how long a trunk call can be
unanswered during night service before being disconnected. The trunk
must not have Disconnect Supervision for this timer to apply.
Usage
If this field is 0, the Conference Parties with Public Network Trunks
field will not appear on the screen.
Usage
Specifies the number of seconds that reset shift dial tone is audible before
busy tone is heard. Reset shift dial tone allows the user to dial a new
extension by dialing one new digit that replaces the last digit of the
extension previously dialed. The new digit replaces the last digit of the
extension previously dialed.
Enter 0 to disable this feature.
Feature-Related System Parameters
Mode Code Related System Parameters on
Issue 2.1 May 2006 1005