Signaling Group - Avaya Communication Manager Administrator's Manual

Signaling Group

Use this screen to establish signaling group parameters for ISDN-PRI, H.323, ATM, and SIP
Enablement Services (SES) trunks. Because these trunk types vary in the types of parameters
needed, the fields that appear on this screen change depending on the value of the Group
Type field. Field descriptions are alphabetized for easier reference.
Field descriptions for page 1
Figure 530: Signaling Group screen when the Group Type field is atm
add signaling-group nnn
Group Number
Trunk Group for Channel Selection:
CIRCUIT PARAMETERS
Virtual Path Identifier: 0
Virtual Channel Identifier: 0
___
Supplementary Service Protocol: _
Signaling Mode: isdn-pri
Idle Code: 11111111
Interface Companding: mulaw
Country Protocol: 1
Protocol Version: d
SIGNALING GROUP
Group Type: atm___
Max Number of NCA TSC: ___
D-Channel:
Trunk Group for NCA TSC:
___
Network Call Transfer? n
DCP/Analog Bearer Capability:
Interworking Message:
Signaling Group
Page 1 of x
Name:
Max number of CA TSC:
Circuit Type: T1
Connect: network
Issue 2.1 May 2006
___
___
1411