Avaya Communication Manager Administrator's Manual page 1393

Band
Enter a number that represents the OUTWATS band number (US only).
WATS is a voice-grade service that provides both voice and low-speed data transmission calls
to defined areas (bands) for a flat rate charge.
This field appears when the Services/Features field is outwats-bnd and when ISDN-PRI or
ISDN-BRI Trunks field is y on the System-Parameters Customer-Options screen. Band is
required by Call-by-Call Service Selection.
BCC Value
Bearer Capability Class (BCC) identifies the type of call appropriate for this trunk group, such as
voice calls and different types of data calls. This field appears when the ISDN-PRI or ISDN-BRI
Trunks field is y on the System-Parameters Customer-Options screen.
Valid entries
y/n
The following table explains BCC values
:
BCC Value
0
1
2
3
4
W
BCIE (Bearer Capability Information Element)
This field applies to ISDN trunks and appears if ITC is both.
Valid entries
ept (endpoint)
unr (unrestricted)
Usage
Enter y in appropriate BCC column (0, 1, 2, 3, 4, or W) if the BCC is valid
for the associated route pattern. A trunk group preference can have more
than one BCC.
Description
Voice-Grade Data and Voice
56-kbps Data (Mode 1)
64-kbps Data (Mode 2)
64-kbps Data (Mode 3)
64-kbps Data (Mode 0)
128 to 1984-kbps Data (Wideband)
Usage
Use BCIE to determine how to create the ITC codepoint in the setup
message.
Route Pattern
Issue 2.1 May 2006 1393