Avaya Communication Manager Administrator's Manual page 1415

Country Protocol
Appears when the Group Type field is atm. The entry in this field must match the country
protocol used by the far-end server. For connections to a public network, your network service
provider can tell you which country protocol they are using. For a list of country codes, see the
Country code table
Valid entries
1 to 25
etsi
D Channel
Appears when the Group Type field is atm. Enter the necessary characters.
.
Valid entries
01 to 03 (DEFINITY CSI) or
1 to 64 (S8700/S8300 Media Servers)
A to E
0 to 20
01 to 04 (Analog TIE trunks)
09 to 32
DCP/Analog Bearer Capability
Appears when the Group Type field is atm or h.323. This field sets the information transfer
capability in a bearer capability IE of a setup message to speech or 3.1kHz.
Valid entries
3.1kHz
speech
on page 1514.
Usage
Enter the country protocol used by the central office at which this link
terminates.
Enter etsi if your network service provider uses the protocol of the
European Telecommunications Standards Institute (ETSI). Enter etsi only
if the Signaling Mode field is isdn-pri.
Usage
Provides 3.1kHz audio encoding in the information transfer capability. This is
the default.
Provides speech encoding in the information transfer capability.
Usage
First and second characters are the cabinet number
Third character is the carrier
Fourth and fifth character are the slot number
Six and seventh characters are the circuit number
Signaling Group
Issue 2.1 May 2006 1415