Avaya Communication Manager Administrator's Manual page 1611

This field appears when the Direction field is outgoing or two-way.
Valid entries
0 to 100
0
Service Type
Indicates the service for which this trunk group is dedicated. The following table provides a
listing of predefined entries. In addition to the Services/Features listed in this table, any
user-defined Facility Type of 0 (feature) or 1 (service) on the
allowed.
As many as 10 ISDN trunk groups can have this field administered as cbc (for Avaya DEFINITY
Server CSI).
Valid entries
access
accunet
cbc
dmi-mos
i800
inwats
lds
megacom
mega800
Usage
Enter the number of outgoing calls that you want to be held waiting when
all trunks are busy.
Enter 0 for DCS trunks.
Usage
A tie trunk giving access to an Electronic Tandem Network.
ACCUNET Switched Digital Service — part of ACI (AT&T Communications
ISDN) phase 2.
Call-by-Call service — provides different dial plans for different services on
an ISDN trunk group. Indicates this trunk group is used by the Call-By-Call
Service Selection feature.
Digital multiplexed interface — message oriented signaling.
International 800 Service — allows a subscriber to receive international
calls without a charge to the call originating party.
INWATS — provides OUTWATS-like pricing and service for incoming calls.
Long-Distance Service — part of ACI (AT&T Communications ISDN) phase
2.
MEGACOM Service — an AT&T communications service that provides
unbanded long-distance services using special access (switch to 4ESS
switch) from an AT&T communications node.
MEGACOM 800 Service — an AT&T communications service that provides
unbanded 800 service using special access (4ESS switch to switch) from
an AT&T communications node.
Network Facilities screen is
Issue 2.1 May 2006
Trunk Group
1 of 2
1611