Avaya Communication Manager Administrator's Manual page 1320

Screen Reference
Outgoing II by COR
Appears only if either Use COR for Calling Party Category or Use COR for All Group II
Responses on page 1 are set to y. The Group II signal sent to the CO on outgoing calls can be
administered per COR (Class of Restriction) and per trunk group. The Group II signal is
administered per COR. That per-COR value in turn can be mapped into a possibly different
outgoing signaling parameter set. The values in the Outgoing II by COR fields administer that
outgoing mapping.
Valid entries
1 to 10
Request Call Category at Start of Call
Indicates that the Send-ANI backward signal requesting for the caller-category information will
be sequenced differently in the MFC signaling flow. The Caller-category Request backward
signal is disjointed from the ANI request.
Valid entries
y/n
Request CPN at Start of Call
This field appears only if the Incoming Call Type field is group-ii-mfc. Provides for
Communication Manager to collect ANI and call category immediately after receipt of the first
address digit.
Valid entries
y/n
1320 Administrator Guide for Avaya Communication Manager
Usage
Enter a number between 1 and 10 that maps to the Group II signal
Communication Manager sends to the CO on outgoing calls
Usage
If y, the Send-ANI backward signal corresponds exclusively to the
caller-category request. In response to this signal, Avaya Communication
Manager sends a forward signal containing the caller-category
information on outgoing calls. On incoming calls, Communication
Manager sends the Send-ANI backward signal upon receipt of the first
address signal.
Usage
If y, provides ANI (Calling Party Number (CPN) and call category)
immediately after receiving the first address digit.