Time Of Day Routing Plan - Avaya Communication Manager Administrator's Manual

Screen Reference
CVG Path
Enter the coverage path number.
.
Valid entries
1 to 9999 or blank
Time of Day Coverage Table
A display-only field when the screen is accessed using an administration command. Specifies
the Time of Day Coverage Table number. Up to 999 can be administered.

Time of Day Routing Plan

Use this screen to set up Time of Day Routing Plans. You can route AAR and ARS calls based
on the time of day each call is made. You can design up to 8 Time of Day Routing Plans, each
scheduled to change up to 6 times a day for each day in the week.
Match the Time of Day Routing Plan PGN# with the PGN# field on the Partition Routing Table
for the route pattern you want to use.
Note:
Automatic Route Selection (ARS) or Private Networking, AAR/ARS
Note:
Partitioning, and Time of Day Routing must be enabled on the
System-Parameters Customer-Options screen before you can use Time of
Day Routing.
1588 Administrator Guide for Avaya Communication Manager
Usage
For the S8700 Series IP-Connect